The
U.S. Fish and Wildlife Service today announced $11.4 million in grants
to 24 states under the Clean Vessel Act (CVA) grant program. Since its
creation in 1992, the CVA program has provided funds to States to
construct, replace, renovate, and maintain facilities that assist
recreational boaters in properly disposing of on-board septic waste.
The program also provides information and education on the importance,
benefits, and availability of pumpouts. Funds for the CVA program are
provided annually from the Sport Fish Restoration and Boating Trust
Fund.
“It’s
an honor to recognize 20 years of the Clean Vessel Act and helping to
keep waters clean,” said Service Director Dan Ashe. “Over the past 20
years, the Service’s Wildlife and Sport Fish Restoration Program has
awarded almost $200 million in CVA grants. I am pleased that these
efforts are put in place to benefit wildlife, sport fishing,
recreational boating, and communities across America.”
In addition to traditional on-dock pumpouts, projects include pumpout
boats that travel in designated harbors to make the sewage collection
process more efficient and convenient. Some States also have begun
installing floating restrooms in areas where boaters congregate and no
restrooms are available.
"No group has a more direct interest in clean water than recreational
boaters do today," said Margaret Podlich, President of the Boat Owners
Association of The United States. "That's why we support the CVA grant
program and all of the other programs that boaters and anglers pay for
through the Sport Fish Restoration and Boating Trust Fund."
For more information on the 2012 grant awards made today visit:
http://wsfrprograms.fws.gov/Subpages/GrantPrograms/CVA/CVA2012Funding.pdf
For more information on the CVA program visit:
http://wsfrprograms.fws.gov/Subpages/GrantPrograms/CVA/CVA.htm
Your place for fishing and boating information. Bookmark us for industry updates, product information and reviews, plus more...
Tuesday, June 12, 2012
Thursday, May 31, 2012
Less Damage To Boats Stored, Tied Down Ashore
The Latest Trend in Boat Hurricane Preparation: Tie Her Down
BoatUS Finds Less Damage To Boats Stored, Tied Down Ashore
"We've known for a long time that the most effective storm preparation tactic a boat owner can do is to remove the boat from the water and store her ashore in a location above the anticipated storm surge," said BoatUS Director of Damage Avoidance Bob Adriance. "That's why we created the Hurricane Haul-out Coverage overage included in all our boat insurance policies that helps defray the cost to remove a boat from the water."
"But over the last few years, we've now learned that if you add tie-downs on both sides of a boat that are secured to deck cleats and either embedded in the concrete pad or deeply screwed into the earth with helical anchors, you can almost eliminate storm damage from all but the most severe storms. Of course, you also have to include other measures, such as reducing windage by removing roller-furled sails and biminis, and ensuring that jack-stands rest on a firm surface, but if you want the least damage and want to get back on the water after a storm as quickly as possible, pulling the boat from the water and firmly tying her down are a winning plan," added Adriance.
BoatUS also offers free online help with the web's most complete Hurricane Resource Center designed specifically for boaters, clubs and marinas at www.BoatUS.com/Hurricanes. It includes detailed storm-tracking information as well as the no-cost, downloadable Boater's Guide to Preparing Boats and Marinas for Hurricanes.
All BoatUS boat policies include "Named Storm Haul-out Reimbursement." When a boat is in the path of a NOAA-named storm (within the five-day "cone"), a boater is eligible to be reimbursed for 50% of the cost of labor, up to $1,000, to have the boat professionally hauled, prepared and tied-down, or moved to a safe location. With BoatUS, a hurricane haul-out "claim" does not penalize a policyholder.
Wednesday, May 30, 2012
LightSquared Files for Bankruptcy
Thanks to Boaters Who Spoke Up: "Save My GPS"
"Boaters can appreciate having GPS first hand," said BoatUS President Margaret Podlich. "They know it will get them safely home, help them find the best fishing, meet friends for an afternoon raft-up, and greatly speed their rescue if the day goes bad. We thank the 18,000 boaters and other GPS users who wrote the FCC asking the guardian of the nation's airwaves to ensure the future integrity of the GPS signal, and the FCC for listening and acting on our concerns."
Even with the company's May 14 Chapter 11 filing, LightSquared continues to be a challenging adversary, stating, "The voluntary Chapter 11 filing is intended to give LightSquared sufficient breathing room to continue working through the regulatory process that will allow us to build our 4G wireless network." Under federal bankruptcy law, LightSquared would maintain exclusive control for several months over the right to craft a path to emerge from Chapter 11. The company originally asked the FCC for permission to build 40,000 network ground stations across the country. Recent government reports concluded interference issues with the GPS system could not be overcome.
BoatUS is a member of the Coalition to Save Our GPS, which worked to resolve this threat to the GPS system. After losing their only other viable navigation system (LORAN) in 2010 after the Department of Homeland Security shut the system down, boaters now solely rely on GPS for electronic navigation. The US Coast Guard's emergency search and rescue system, Rescue 21, also now uses GPS to locate stricken vessels on over 41,746 miles of coastline, and mariners also rely on GPS-enabled communications with DSC VHF radios and emergency beacons to provide location information.
Tuesday, May 22, 2012
Boat Ramps are Like Security Checkpoints at Airports: Nobody Wants to Wait in That Line
Don't Be That Guy
But look, I'm convinced that if I ever stop filming fishing shows, I could show up on any boat ramp in America on Memorial Day weekend and film a best-selling blooper tape of people struggling on boat ramps.
Look, do me a favor. Do us all a favor. Don't be "that guy." If you're reading this and you aren't absolutely confident that you'll be a thing of perfect efficiency when you get to the ramp this weekend - well, then - fix what needs fixing.
Is your cranking battery fresh, or has it been sitting stale as last year's Christmas cookies? And please tell me you're not going to ask your wife or brother-in-law, neither of whom have ever backed a boat down a ramp in their life, to "help you."
If you just absolutely have to rely on an amateur for assistance, then I'd recommend going to an empty parking lot for practice until they are experts at backing-up a trailer before you even consider humiliating them and yourself on ?game day' this coming weekend.
See, here's the deal, boat ramps are like security checkpoints at airports. Nobody wants to wait in that line, so don't make it worse by being totally unprepared when you're up to bat.
Boat ramps are not maintenance garages. It's not a place to tune up your outboard, organize your fishing tackle or take inventory of your water skies and inflatables.
It's not a playground either, so rein in the zoo monkeys. I love taking my kids to the lake. It's an important part of our lives. But I don't let the little crumb snatchers run rampant on the launch ramp. It's dangerous, and it's irresponsible.
Think of boat ramps as a tollbooth. Get in. Get out. And getting out doesn't mean pulling up five-feet from the water's edge and stopping. Get way out of the way before you stop to re-adjust all your equipment for the ride home.
You guys that are reading this probably don't need a lecture. Most of you are proficient bass boat owners. But "the guy" that is "that guy" probably doesn't even realize that he is "that guy." So help him out, dudes. If you have one of those guys in your life - help him get prepared - Memorial Day is not the time to be a jackknife on the boat ramp.
And by all means, speaking of being prepared, no matter how proficient you are on the ramp - make sure you call BoatUS Angler to sign-up for a membership www.BoatUS.com/angler/. You just never know when you're gonna need assistance on the road to the lake, or once you're on the water. And certainly let's hope none of us have issues on the boat ramp this coming weekend.
Saturday, May 12, 2012
The Life of a Middle-Aged Boat
And What to Do About It
With people, middle age begins at around 40. With boats, it's about the 10-year mark. And for both, it signals a time when age begins to show. But that doesn't mean life is slowing down - only that more effort is needed to stay in shape. With decade-old boats, that means taking a hard look at things that haven't been checked out over the years. BoatUS has these nine "middle age" maintenance tips on boats:
Bilge pumps: Like a Louisiana oil field roughneck, a ten-year old bilge pump has likely lead a tough life. Switches are often the first to go, so make sure yours works fine by pouring water in the bilge to activate the pump, making sure nothing interferes with the switch. Take a close look at wire connections as they often are near or in standing water at the bottom of the boat.
Gas hose: When it was new, the fuel hose did a great job of delivering gas to the engine. Over time, however, gas can permeate the hose wall causing damage. Take a rag around the hose, wipe it down and then smell the rag. If you smell gas, replace hose immediately. If you do have to replace, always install new hose clamps, too.
Steering and control cable: Like an arthritic knee, bend the cable in your hands and listen for "crunching," a telltale sign that all is not well. Swelling and rust are also bad signs and indicate it's time to replace.
Caulked fittings: The boatyard rule of thumb is that after 10 years, the bedding compound owes you nothing. Begin a schedule to periodically remove and rebed fittings, doing a few each year so the job isn't overwhelming. This will keep the leaks out that could lead to more expensive repairs.
Prop: Eventually all props get dinged, and you may not see the damage clearly with your eye. If it's never been to a shop, now is a good time to take it to a prop shop for reconditioning, and you'll also likely save some money on fuel with a tuned prop.
Other drive gear: If you have an inboard, the cutlass bearing might be due for replacement, especially if there's more than just a smidgen of play in the drive shaft. It's also time to take a hard look at the stuffing box. If you've had to re-tighten the stuffing box nut often, it's time to replace the packing.
Exhaust manifolds: If you boat in salt or brackish waters and you still have the original manifolds, thank your lucky stars they haven't failed yet. Now is the time to do some proactive maintenance to replace them. "Leaking manifolds can destroy an engine," said BoatUS Seaworthy Magazine Associate Editor Chuck Fort.
Seacocks/Through Hulls: If it's been years since one has been fully opened and closed, it could be frozen, and that's useless. Make it a point to work seacocks a few times each season and while you're there, check the hose clamps.
Standing rigging: When was the last time you had a close look at all of the fittings and mast attachments (even the ones up high)? Ten years is a long time for rigging on boats that are raced, but even those used for day sails can suffer from the cyclical loads that cause stress cracks, and saltwater can cause corrosion in swaged fittings not easily seen by the naked eye.
For more information on inspecting middle-aged boats from BoatUS' Seaworthy Magazine, the publication for BoatUS insureds, go to BoatUS.com/middleagedboats.
About BoatUS Seaworthy Magazine:
Published four times a year by BoatUS Marine Insurance, Seaworthy's pages are filled with case studies that provide insight into how to avoid accidents, breakdowns, injuries and the "unexpected" circumstances that can jeopardize the safety of your boat and guests. Annual subscriptions are available for $10 at www.BoatUS.com/seaworthy. For a free online insurance quote, go to www.BoatUS.com/insurance or call 800-283-2883 .
Thursday, April 26, 2012
Three Safety Tips to Safely Get You Through the Spring Fishing and Boating Season
In many parts of
the country, people are asking when did winter end and spring begin?
Anglers and boaters are taking advantage of the unusually warm weather,
but some may be forgetting that cold waters still lurk beneath the
keel. Here's three easy safety tips from BoatUS.com/foundation that will help you get safely through the spring fishing and boating season.
-
Don't allow the warm weather to let your guard down:
The air temperatures may be downright balmy, but deceptively cold
waters increase the risk of hypothermia even on a "T-shirt" day. Also
remember there are fewer boats out on the water that could come to your
aid. Bring extra layers or change of clothes and rain gear this time
of year.
-
Plan on how to get back in the boat:
If you accidentally went overboard, do you have a way to get back
aboard? You may be surprised how hard this can be - especially if you
are alone or haven't prepared for it. It could be as simple as having a
rope with looped foot holds affixed to a cleat that can easily be
grabbed from the water. The BoatUS Foundation also tested after-market
boarding ladders for small jonboats, RIBs and larger center console
boats. You can view these tests at youtube.com/user/BoatUSFoundation/videos?sort=dd&
A hardcopy of the tests along with a ranking of the best ladders can
also be found at BoatUS.com/foundation/boardingladders.
-
Refresh your memory: Take
a boating safety course now from the comfort of your own home. The
no-cost BoatUS Foundation Online Boating Safety course, which is
designed so that you can stop and then continue at any time, includes
videos that demonstrate important safety devices such as flares, shows
the rules of the road, how to get help in an emergency, and the best way
to fit a life jacket to a child so they will not slip out. Go to BoatUS.org/onlinecourse. It may also help you save money on boat insurance and meet your state's requirements for boating safety education.
Thursday, April 12, 2012
Model year designations for Evinrude outboard engines eliminated
BRP will eliminate traditional model year designations for Evinrude
outboard engines. Beginning in April 2012, model year designations will
no longer be used. Instead, the date of manufacture will be referenced
on the serial number label, located on each Evinrude outboard engine.
Benefits to model year elimination include:
· Quicker Product Updates – Consumers will not have to wait for a model year transition to receive the latest product developments from Evinrude
· Simplicity – Instead of tracking two model years, one for the boat and one for the engine, Evinrude outboard owners will only have to reference the model year of their boat package
· Improved Inventory Management – Authorized Evinrude dealers and OEM partners will be able to manage their inventory more effectively and ensure the most recent Evinrude outboard models are available to their customers
“BRP remains committed to the award-winning Evinrude E-TEC technology, and the model year elimination is consistent with current standards in the marine industry,” said Steve Laham, vice-president of Sales, Marketing and After-Sales, Evinrude. “By eliminating model year, consumers will be provided with product upgrades earlier without having to wait for the start of a new model year. Overall, this change will be positive for our customers, dealers and OEM partners worldwide.”
The model year elimination will not affect the warranty of any Evinrude outboard engine, nor will it affect the resale or trade-in value of an outboard engine or boat package. In states that require a manufacturer’s statement of origin (MSO) for titling purposes, Evinrude will supply the appropriate MSO information to its dealer network.
Consumer questions about model year elimination can be directed to Evinrude’s customer service center at 1-866-EVINRUDE or by contacting an authorized Evinrude dealer.
· Quicker Product Updates – Consumers will not have to wait for a model year transition to receive the latest product developments from Evinrude
· Simplicity – Instead of tracking two model years, one for the boat and one for the engine, Evinrude outboard owners will only have to reference the model year of their boat package
· Improved Inventory Management – Authorized Evinrude dealers and OEM partners will be able to manage their inventory more effectively and ensure the most recent Evinrude outboard models are available to their customers
“BRP remains committed to the award-winning Evinrude E-TEC technology, and the model year elimination is consistent with current standards in the marine industry,” said Steve Laham, vice-president of Sales, Marketing and After-Sales, Evinrude. “By eliminating model year, consumers will be provided with product upgrades earlier without having to wait for the start of a new model year. Overall, this change will be positive for our customers, dealers and OEM partners worldwide.”
The model year elimination will not affect the warranty of any Evinrude outboard engine, nor will it affect the resale or trade-in value of an outboard engine or boat package. In states that require a manufacturer’s statement of origin (MSO) for titling purposes, Evinrude will supply the appropriate MSO information to its dealer network.
Consumer questions about model year elimination can be directed to Evinrude’s customer service center at 1-866-EVINRUDE or by contacting an authorized Evinrude dealer.
Subscribe to:
Posts (Atom)