USCG Marine Safety Alert

PROBLEM WITH MUSTANG INFLATABLE PFDS

Washington, DC

The Coast Guard has become aware of certain Mustang Survival Inflatable PFDs with Hammar MA1 hydrostatic (HIT) inflation systems which may not inflate and require a new re-arm kit to properly inflate by manual or automatic activation. This safety alert identifies which products are affected. Certain inflatable PDFs may be subject to delayed or non-inflations. To determine if you are impacted please follow the instructions below.

USCG Approval                Mustang Product
N/A                                   MA7214 HIT inflatable re-arm kit
N/A                                   MA7218 HIT inflatable re-arm kit for LIFT
160.076/8611/0                 MD0450 Inflatable Vest PFD with LIFT
160.076/5204/0                 MD0451 Inflatable Vest PFD with LIFT (no harness)
160.076/5201/0                 MD3183 Deluxe Inflatable PFD with HIT
160.076/8608/0                 MD3184 Deluxe Inflatable PFD with HIT (with harness)
160.076/5300/0                 MD3188 Inflatable Work Vest/PFD with HIT
160.053/116/0                   MD3188 Inflatable Work Vest/PFD with HIT  

If you have a re-arm kit MA7214 or MA7218 you need only to check

the lot number on the CO2 cylinder label. If your CO2 cylinder is
marked with lot numbers 404121 or 404122 please contact Mustang
Survival’s customer service group at the number below.
 

If you have a PFD listed above refer to the sewn-in approval label to
determine if it was “Made in Canada” and the “MFG DATE” is April
or May 2012. If so, you will need to check the lot numbers of the
CO2 cylinder. The CO2 cylinder lot number is visible through the
yellow bladder fabric. Manually unpack your PFD by opening the
zippers and unfolding your PFD. Find the CO2 cylinder that is
attached to the round inflator within the yellow bladder. Press the
yellow bladder fabric against the cylinder to read the label to view
the lot number through the fabric. If your CO2 cylinder is marked
with lot numbers 404121 or 404122, please contact Mustang
Survival’s customer service group for instructions and to arrange for
a replacement inflator assembly.
 

All other CO2 cylinder lot numbers are satisfactory. Repack your PFD so it is ready for use per the instruction manual. Mustang Survival Customer Service Group: 1-800-526-0532

This Safety Alert is provided for informational purposes and does not relieve any foreign or domestic requirement. Developed by the Lifesaving and Fire Safety Division, United States Coast Guard Headquarters, Washington, DC. For additional information contact Mr. Martin Jackson at Martin.L.Jackson@uscg.mil
 

Additional information is available at www.mustangsurvival.com/HIT. 

Please note the following photographs.

View of lot number through fabric

Lot number on cylinder label.